These four points are the daily maintenance of the shot blasting machine
In daily use, the shot blasting machine will inevitably have some damage, but how to repair it? According to the experience of the shot blasting machine maintenance personnel, the shot blasting machine maintenance should adopt different maintenance methods according to the different service cycles. Pay attention to the following four points:
1. Regular lubrication: the lubricating oil of the electric actuator motor and transmission device of the shot blasting machine to lubricate the components and the viscosity changes of the lubricating oil. Almost all steel castings, gray castings, malleable steel parts, ductile iron parts, etc. must be shot blasted. This will not only remove the oxide scale and sticky sand on the surface of the casting, but also ensure the preparation before the quality inspection of the casting. For example, the shell of a large gas turbine must be subjected to strict shot blast cleaning before non-destructive testing to ensure the test results. Reliability.
2. Improve the working environment of the enterprise: In order to ensure the reliability of the electric executive management mechanism of the shot blasting machine, it must be ensured that it operates in a suitable operating environment to avoid short circuit or other failures due to environmental factors such as social humidity.
3; Regular inspection: Regular inspection to find the cause of the accident, at least to eliminate the fault and avoid detours.
4. Do a good job in the management of the failure account: a detailed information record should be made for each failure handled, including system failure phenomena, failure data analysis and search process, main reasons, treatment methods and preventive control.